Find a Service Center
Boston Gear
F718-10-B7-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101653057
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Do not exceed maximum primary pressure rating, as product could rupture and cause injury
- Do not connect regulator to bottled gas
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Frame Size | 140TC, 180C |
| Standard | AGMA Service Class I |
| Output Shaft Projection | Solid Left Output |
| Motor HP | 1 1/2 hp |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Input Configuration | C-Face Quilled |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Base Mounting Attachment | No Base |
| Output Shaft | Solid |
| Base | No |
| Input Motor HP | 1.50 |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Torque Out @ 1750 rpm | 536 in lb |
| Housing Material | Cast Iron |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Output Torque | 536 lb-in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Media Mapping Output | G |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Use With | 718 |
| Ratio | 10:1 |
| Fan Cooled | No |
| Output Speed | 175 rpm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Box Width | 5 1/32 in |
| Media Mapping Style | F |
| Family Name | F |
| Output Configuration | Left Output |
| Bore Code | B7 |
| HP @ RPM | 1 hp @ 1800 rpm |
| Box Length | 5 1/2 in |
| Motor Application | General Purpose |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Frame | 140TC, 180C |
| Output Bore Shaft Dia. | 0.875 in |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Worm Position | Universal |
| Series | 700 |
| Lubrication | None |
| Washdown Duty | No |
| Torque Out @ 1150 rpm | 480 in lb |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Motor Frame Size | B7140TC180C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Shaft Assembly Code | G |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Reduction Type | Single |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Style | Right Angle |
| Output (Shaft or Bore) Size | 7/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Box Height | 5 3/4 in |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Center Distance | 1.75 in |
| Center Distance Code | 718 |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Rated Efficiency | 92% |
| Weight | 19.1 LB |
| EAN or UPC | 781711525791 |
