Find a Service Center
Boston Gear
F7718-30-B5-G
700 Series 30:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #102224659
- 0.5 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Style | Right Angle |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Frame | 56C |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Rated Efficiency | 82% |
| Output Shaft Projection | Solid Left Output |
| Base Mounting Attachment | No Base |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Torque Out @ 1150 rpm | 530 in lb |
| Input Configuration | C-Face Quilled |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Shaft Assembly Code | G |
| Output Shaft | Solid |
| Bore Code | B5 |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Center Distance | 1.75 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Box Width | 5 1/32 in |
| Motor Application | General Purpose |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Fan Cooled | No |
| Input Motor HP | 0.50 |
| Motor Frame Size | B556C |
| Input HP @ RPM | 0.65 hp @ 1750 rpm, 0.4 hp @ 1150 rpm |
| Input Power Rating | 0.65 hp, 0.485 kW |
| Family Name | F |
| Input (Shaft or Bore) Size | 5/8 in |
| Lubrication | None |
| Media Mapping Output | G |
| Output Bore Shaft Dia. | 0.875 in |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Output Configuration | Left Output |
| Series | 700 |
| Frame Size | 56C |
| HP @ RPM | 0.5 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Output Torque @ RPM | 573 in lb @ 1750 rpm, 530 in lb @ 1150 rpm |
| Box Height | 5 3/4 in |
| Output Speed | 58.3 rpm |
| Housing Material | Cast Iron |
| Media Mapping Style | F |
| Output Torque | 573 lb-in |
| Use With | 718 |
| Base | No |
| Ratio | 30:1 |
| Washdown Duty | No |
| Material | Cast Iron, Standard Paint |
| Box Length | 5 1/2 in |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Reduction Type | Single |
| Standard | AGMA Service Class II |
| Center Distance Code | 718 |
| Torque Out @ 1750 rpm | 573 in lb |
| Output (Shaft or Bore) Size | 7/8 in |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Worm Position | Universal |
| Weight | 19.1 LB |
| EAN or UPC | 781711519394 |
