Boston Gear
F7718-30-B5-G
700 Series 30:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #102224659
- 0.5 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Use With | 718 |
| Box Length | 5 1/2 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Worm Position | Universal |
| Media Mapping Style | F |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Output Configuration | Left Output |
| Shaft Assembly Code | G |
| Center Distance | 1.75 in |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Style | Right Angle |
| Output Bore Shaft Dia. | 0.875 in |
| Output (Shaft or Bore) Size | 7/8 in |
| Fan Cooled | No |
| Box Height | 5 3/4 in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Torque Out @ 1750 rpm | 573 in lb |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Rated Efficiency | 82% |
| Reduction Type | Single |
| Frame Size | 56C |
| Ratio | 30:1 |
| Output Torque @ RPM | 573 in lb @ 1750 rpm, 530 in lb @ 1150 rpm |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Motor Frame Size | B556C |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Base Mounting Attachment | No Base |
| Material | Cast Iron, Standard Paint |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Output Speed | 58.3 rpm |
| Center Distance Code | 718 |
| Base | No |
| Frame | 56C |
| Box Width | 5 1/32 in |
| Lubrication | None |
| Standard | AGMA Service Class II |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Series | 700 |
| Housing Material | Cast Iron |
| Output Torque | 573 lb-in |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Washdown Duty | No |
| Output Shaft Projection | Solid Left Output |
| Bore Code | B5 |
| Output Shaft | Solid |
| Family Name | F |
| HP @ RPM | 0.5 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Media Mapping Output | G |
| Input Power Rating | 0.65 hp, 0.485 kW |
| Input (Shaft or Bore) Size | 5/8 in |
| Input Motor HP | 0.50 |
| Torque Out @ 1150 rpm | 530 in lb |
| Input Configuration | C-Face Quilled |
| Input HP @ RPM | 0.65 hp @ 1750 rpm, 0.4 hp @ 1150 rpm |
| Motor Application | General Purpose |
| Weight | 19.1 LB |
| EAN or UPC | 781711519394 |
