Find a Service Center
Boston Gear
F718-60-B5-G
700 Series 60:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101350432
- 0.33 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input HP @ RPM | 0.35 hp @ 1750 rpm, 0.21 hp @ 1150 rpm |
| Input Configuration | C-Face Quilled |
| Base Mounting Attachment | No Base |
| Style | Right Angle |
| Family Name | F |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Ratio | 60:1 |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Center Distance | 1.75 in |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Output Torque | 527 lb-in |
| Series | 700 |
| Media Mapping Style | F |
| Output Shaft Projection | Solid Left Output |
| Standard | AGMA Service Class I |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Output Bore Shaft Dia. | 0.875 in |
| Box Height | 5 3/4 in |
| Fan Cooled | No |
| Output Shaft | Solid |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Media Mapping Output | G |
| Torque Out @ 1150 rpm | 440 in lb |
| Box Width | 5 1/32 in |
| HP @ RPM | 0.25 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Shaft Assembly Code | G |
| Output Configuration | Left Output |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Motor HP | 0.3333 hp |
| Torque Out @ 1750 rpm | 527 in lb |
| Lubrication | None |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Base | No |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Frame Size | 56C |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Frame | 56C |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Output Speed | 29.2 rpm |
| Worm Position | Universal |
| Use With | 718 |
| Housing Material | Cast Iron |
| Rated Efficiency | 70% |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Input Motor HP | 0.33 |
| Bore Code | B5 |
| Box Length | 5 1/2 in |
| Input Power Rating | 0.35 hp, 0.261 kW |
| Output (Shaft or Bore) Size | 7/8 in |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Output Torque @ RPM | 527 in lb @ 1750 rpm, 440 in lb @ 1150 rpm |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Motor Application | General Purpose |
| Center Distance Code | 718 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Motor Frame Size | B556C |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Reduction Type | Single |
| Weight | 19.1 LB |
| EAN or UPC | 781711519486 |
