Find a Service Center
Boston Gear
F718-60-B5-H
700 Series 60:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101833973
- 0.33 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft | Solid |
| Motor HP | 0.3333 hp |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Media Mapping Style | F |
| Output (Shaft or Bore) Size | 7/8 in |
| Input Motor HP | 0.33 |
| Reduction Type | Single |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Box Length | 5 1/2 in |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Media Mapping Output | H |
| Input HP @ RPM | 0.21 hp @ 1150 rpm, 0.35 hp @ 1750 rpm |
| Bore Code | B5 |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Fan Cooled | No |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output Torque @ RPM | 440 in lb @ 1150 rpm, 527 in lb @ 1750 rpm |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Washdown Duty | No |
| Motor Frame Size | B556C |
| Input Power Rating | 0.35 hp, 0.261 kW |
| Housing Material | Cast Iron |
| Input Configuration | C-Face Quilled |
| Frame | 56C |
| Center Distance Code | 718 |
| Shaft Assembly Code | H |
| Rated Efficiency | 70% |
| Output Speed | 29.2 rpm |
| Standard | AGMA Service Class I |
| Material | Cast Iron, Standard Paint |
| Center Distance | 1.75 in |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Output Bore Shaft Dia. | 0.875 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Base | No |
| Keyway Size | 3/16 x 3/32 |
| Frame Size | 56C |
| Torque Out @ 1150 rpm | 440 in lb |
| Family Name | F |
| Ratio | 60:1 |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Input (Shaft or Bore) Size | 5/8 in |
| Style | Right Angle |
| Output Configuration | Left & Right Output |
| Box Height | 5 3/4 in |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Box Width | 5 1/32 in |
| Motor Application | General Purpose |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Output Shaft Projection | Solid Double Projecting Output |
| Lubrication | None |
| Worm Position | Universal |
| Output Torque | 527 lb-in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Torque Out @ 1750 rpm | 527 in lb |
| Series | 700 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Use With | 718 |
| Weight | 19.1 LB |
| EAN or UPC | 781711519493 |
