Find a Service Center
Boston Gear
F7724-30-B5-G
700 Series 30:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807809
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Media Mapping Style | F |
| Input (Shaft or Bore) Size | 5/8 in |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Series | 700 |
| Reduction Type | Single |
| Worm Position | Universal |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Output Configuration | Left Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Input Power Rating | 1.33 hp, 0.992 kW |
| Output Shaft | Solid |
| Material | Cast Iron, Standard Paint |
| Center Distance Code | 724 |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Ratio | 30:1 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Shaft Assembly Code | G |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Standard | AGMA Service Class II |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Bore Code | B5 |
| Use With | 724 |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Torque Out @ 1750 rpm | 1200 in lb |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Motor Application | General Purpose |
| Box Width | 5 7/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Torque Out @ 1150 rpm | 1170 in lb |
| Box Length | 6 3/8 in |
| Rated Efficiency | 83% |
| Washdown Duty | No |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Torque | 1200 lb-in |
| Family Name | F |
| Fan Cooled | No |
| Center Distance | 2.375 in |
| Box Height | 6 15/16 in |
| Input Configuration | C-Face Quilled |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Base Mounting Attachment | No Base |
| Motor Frame Size | B556C |
| Lubrication | None |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Input Motor HP | 1 |
| Motor HP | 1 hp |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input HP @ RPM | 0.89 hp @ 1150 rpm, 1.33 hp @ 1750 rpm |
| Housing Material | Cast Iron |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Output Bore Shaft Dia. | 1.125 in |
| Frame Size | 56C |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Style | Right Angle |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Frame | 56C |
| Bolt Center | 5 in x 2 7/8 in |
| Output Speed | 58.3 rpm |
| Media Mapping Output | G |
| Output Torque @ RPM | 1170 in lb @ 1150 rpm, 1200 in lb @ 1750 rpm |
| Weight | 30.1 LB |
| EAN or UPC | 781711520024 |
