Find a Service Center
Boston Gear
F724-40-B5-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809117
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Configuration | C-Face Quilled |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Use With | 724 |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Rated Efficiency | 77% |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Lubrication | None |
| Motor Frame Size | B556C |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Torque Out @ 1750 rpm | 1206 in lb |
| Standard | AGMA Service Class I |
| Max. Input HP @ 100 rpm | 0.11 hp |
| Ratio | 40:1 |
| Input HP @ RPM | 0.7 hp @ 1150 rpm, 1.08 hp @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Bolt Center | 5 in x 2 7/8 in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Output Speed | 43.8 rpm |
| Fan Cooled | No |
| Family Name | F |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Housing Material | Cast Iron |
| Bore Code | B5 |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Torque Out @ 1150 rpm | 1160 in lb |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Series | 700 |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Output Torque | 1206 lb-in |
| Output Torque @ RPM | 1160 in lb @ 1150 rpm, 1206 in lb @ 1750 rpm |
| Motor HP | 3/4 hp |
| Frame Size | 56C |
| Media Mapping Output | G |
| Style | Right Angle |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Media Mapping Style | F |
| Output Shaft Projection | Solid Left Output |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Center Distance Code | 724 |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Input (Shaft or Bore) Size | 5/8 in |
| Input Motor HP | 1 |
| Frame | 56C |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Motor Application | General Purpose |
| Washdown Duty | No |
| Box Width | 5 7/16 in |
| Base Mounting Attachment | No Base |
| Worm Position | Universal |
| Box Length | 6 3/8 in |
| Reduction Type | Single |
| Material | Cast Iron, Standard Paint |
| Center Distance | 2.375 in |
| Input Power Rating | 1.08 hp, 0.805 kW |
| Box Height | 6 15/16 in |
| Shaft Assembly Code | G |
| Output Configuration | Left Output |
| Output Bore Shaft Dia. | 1.125 in |
| Weight | 30.1 LB |
| EAN or UPC | 781711520055 |
| NSN Number | 3010-01-304-0750 |
