Find a Service Center
Boston Gear
F7724-60-B5-G
700 Series 60:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809379
- 0.75 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Worm Position | Universal |
| Box Width | 5 7/16 in |
| Standard | AGMA Service Class I |
| Output Bore Shaft Dia. | 1.125 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Box Length | 6 3/8 in |
| Reduction Type | Single |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Family Name | F |
| Style | Right Angle |
| Bolt Center | 5 in x 2 7/8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Motor Frame Size | B556C |
| Housing Material | Cast Iron |
| Ratio | 60:1 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Output Shaft Projection | Solid Left Output |
| Max. Input HP @ 100 rpm | 0.073 hp |
| Frame Size | 56C |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Use With | 724 |
| Rated Efficiency | 71% |
| Input Motor HP | 0.75 |
| Center Distance | 2.375 in |
| Washdown Duty | No |
| Box Height | 6 15/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Bore Code | B5 |
| Torque Out @ 1150 rpm | 1040 in lb |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Input Power Rating | 0.73 hp, 0.544 kW |
| Shaft Assembly Code | G |
| Media Mapping Output | G |
| Motor Application | General Purpose |
| Center Distance Code | 724 |
| Output Shaft | Solid |
| Fan Cooled | No |
| Motor HP | 1/2 hp |
| Output Torque @ RPM | 1040 in lb @ 1150 rpm, 1128 in lb @ 1750 rpm |
| Input HP @ RPM | 0.49 hp @ 1150 rpm, 0.73 hp @ 1750 rpm |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Output Torque | 1128 lb-in |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Configuration | Left Output |
| Torque Out @ 1750 rpm | 1128 in lb |
| Output Speed | 29.2 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Frame | 56C |
| Series | 700 |
| Media Mapping Style | F |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Weight | 30.1 LB |
| EAN or UPC | 781711520116 |
| NSN Number | 6105-01-461-1609 |
