Find a Service Center
Boston Gear
F7724-60-B5-G
700 Series 60:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809379
- 0.75 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque | 1128 lb-in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Base Mounting Attachment | No Base |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Input Motor HP | 0.75 |
| Material | Cast Iron, Standard Paint |
| Fan Cooled | No |
| Rated Efficiency | 71% |
| Reduction Type | Single |
| Frame Size | 56C |
| Output Torque @ RPM | 1040 in lb @ 1150 rpm, 1128 in lb @ 1750 rpm |
| Shaft Assembly Code | G |
| Series | 700 |
| Input Configuration | C-Face Quilled |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Bore Code | B5 |
| Center Distance | 2.375 in |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Input Power Rating | 0.73 hp, 0.544 kW |
| Media Mapping Output | G |
| Box Width | 5 7/16 in |
| Ratio | 60:1 |
| Box Height | 6 15/16 in |
| Output Shaft Projection | Solid Left Output |
| Lubrication | None |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Bolt Center | 5 in x 2 7/8 in |
| Use With | 724 |
| Media Mapping Style | F |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Standard | AGMA Service Class I |
| Torque Out @ 1150 rpm | 1040 in lb |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Center Distance Code | 724 |
| Output Configuration | Left Output |
| Box Length | 6 3/8 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Housing Material | Cast Iron |
| Motor Application | General Purpose |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Torque Out @ 1750 rpm | 1128 in lb |
| Frame | 56C |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Output Shaft | Solid |
| Worm Position | Universal |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Style | Right Angle |
| Max. Input HP @ 100 rpm | 0.073 hp |
| Motor HP | 1/2 hp |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Frame Size | B556C |
| Output Bore Shaft Dia. | 1.125 in |
| Output Speed | 29.2 rpm |
| Washdown Duty | No |
| Family Name | F |
| Input HP @ RPM | 0.49 hp @ 1150 rpm, 0.73 hp @ 1750 rpm |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Weight | 30.1 LB |
| EAN or UPC | 781711520116 |
| NSN Number | 6105-01-461-1609 |
