Find a Service Center
Boston Gear
F7724-60-B5-J
700 Series 60:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834962
- 0.75 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Input HP @ 100 rpm | 0.073 hp |
| Style | Right Angle |
| Output Shaft | Solid |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Bore Code | B5 |
| Frame | 56C |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Series | 700 |
| Ratio | 60:1 |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Family Name | F |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Input Power Rating | 0.73 hp, 0.544 kW |
| Input (Shaft or Bore) Size | 5/8 in |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Media Mapping Style | F |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Housing Material | Cast Iron |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Motor HP | 0.5 hp |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Torque Out @ 1150 rpm | 1040 in lb |
| Material | Cast Iron, Standard Paint |
| Output Torque @ RPM | 1040 in lb @ 1150 rpm, 1128 in lb @ 1750 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Media Mapping Output | J |
| Use With | 724 |
| Base Mounting Attachment | No Base |
| Box Width | 5 7/16 in |
| Keyway Size | 3/16 x 3/32 |
| Fan Cooled | No |
| Input Configuration | C-Face Quilled |
| Input HP @ RPM | 0.49 hp @ 1150 rpm, 0.73 hp @ 1750 rpm |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Box Height | 6 15/16 in |
| Center Distance Code | 724 |
| Box Length | 6 3/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Standard | AGMA Service Class I |
| Shaft Assembly Code | J |
| Washdown Duty | No |
| Output Configuration | Right Output |
| Output Speed | 29.2 rpm |
| Center Distance | 2.375 in |
| Worm Position | Universal |
| Output Torque | 1128 lb-in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Frame Size | 56C |
| Rated Efficiency | 71% |
| Lubrication | None |
| Motor Frame Size | B556C |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Reduction Type | Single |
| Output Shaft Projection | Solid Right Output |
| Output Bore Shaft Dia. | 1.125 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Torque Out @ 1750 rpm | 1128 in lb |
| Input Motor HP | 0.75 |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Bolt Center | 5 in x 2 7/8 in |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Weight | 30.1 LB |
| EAN or UPC | 781711520130 |
