Find a Service Center
Boston Gear
F7724-60-B5-J
700 Series 60:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834962
- 0.75 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Torque Out @ 1150 rpm | 1040 in lb |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Shaft Assembly Code | J |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Output Shaft | Solid |
| Ratio | 60:1 |
| Input Motor HP | 0.75 |
| Center Distance | 2.375 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Box Height | 6 15/16 in |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Output Speed | 29.2 rpm |
| Input Configuration | C-Face Quilled |
| Motor Application | General Purpose |
| Output Configuration | Right Output |
| Frame Size | 56C |
| Style | Right Angle |
| Max. Input HP @ 100 rpm | 0.073 hp |
| Frame | 56C |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Material | Cast Iron, Standard Paint |
| Box Length | 6 3/8 in |
| Motor Frame Size | B556C |
| Fan Cooled | No |
| Keyway Size | 3/16 x 3/32 |
| Motor HP | 0.5 hp |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Bore Code | B5 |
| Box Width | 5 7/16 in |
| Reduction Type | Single |
| Housing Material | Cast Iron |
| Input HP @ RPM | 0.49 hp @ 1150 rpm, 0.73 hp @ 1750 rpm |
| Output Torque @ RPM | 1040 in lb @ 1150 rpm, 1128 in lb @ 1750 rpm |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Media Mapping Style | F |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Media Mapping Output | J |
| Output Bore Shaft Dia. | 1.125 in |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Torque Out @ 1750 rpm | 1128 in lb |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Center Distance Code | 724 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Rated Efficiency | 71% |
| Base Mounting Attachment | No Base |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output Shaft Projection | Solid Right Output |
| Lubrication | None |
| Bolt Center | 5 in x 2 7/8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Washdown Duty | No |
| Standard | AGMA Service Class I |
| Output Torque | 1128 lb-in |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Use With | 724 |
| Series | 700 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Family Name | F |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Worm Position | Universal |
| Input Power Rating | 0.73 hp, 0.544 kW |
| Weight | 30.1 LB |
| EAN or UPC | 781711520130 |
