Boston Gear
F7726-25-B7-G
700 Series 25:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835994
- 2 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Washdown Duty | No |
| Max. Input HP @ 100 rpm | 0.18 hp |
| Housing Material | Cast Iron |
| Frame | 140TC, 180C |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Center Distance Code | 726 |
| Style | Right Angle |
| Motor HP | 1.5 hp |
| Torque Out @ 1150 rpm | 1525 in lb |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Input Power Rating | 1.94 hp, 1.447 kW |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Rated Efficiency | 87% |
| Box Height | 8 in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Standard | AGMA Service Class I |
| Lubrication | None |
| Output Bore Shaft Dia. | 1.125 in |
| Fan Cooled | No |
| Center Distance | 2.625 in |
| Media Mapping Style | F |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Motor Frame Size | B7140TC180C |
| Output Speed | 70 rpm |
| Output Configuration | Left Output |
| Family Name | F |
| Ratio | 25:1 |
| Box Length | 7 3/8 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Output Torque | 1514 lb-in |
| Shaft Assembly Code | G |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Motor Application | General Purpose |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Bore Code | B7 |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Torque Out @ 1750 rpm | 1514 in lb |
| Material | Cast Iron, Standard Paint |
| Reduction Type | Single |
| Series | 700 |
| Box Width | 5.9 in |
| Output Shaft Projection | Solid Left Output |
| Output Shaft | Solid |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Input Motor HP | 2 |
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Media Mapping Output | G |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Input (Shaft or Bore) Size | 7/8 in |
| Keyway Size | 3/16 x 3/32 |
| Worm Position | Universal |
| Use With | 726 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Input Configuration | C-Face Quilled |
| Output Torque @ RPM | 1514 in lb @ 1750 rpm, 1525 in lb @ 1150 rpm |
| Input HP @ RPM | 1.31 hp @ 1150 rpm, 1.94 hp @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Frame Size | 140TC, 180C |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Weight | 41.1 LB |
| EAN or UPC | 781711520352 |
