Boston Gear
F7726-30-B7-G
700 Series 30:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #102225774
- 1.50 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
| Output Torque @ RPM | 1521 in lb @ 1750 rpm, 1575 in lb @ 1150 rpm |
| Fan Cooled | No |
| Washdown Duty | No |
| Input HP @ RPM | 1.2 hp @ 1150 rpm, 1.68 hp @ 1750 rpm |
| Ratio | 30:1 |
| Shaft Assembly Code | G |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Center Distance Code | 726 |
| Lubrication | None |
| Frame Size | 140TC, 180C |
| Box Width | 5.9 in |
| Series | 700 |
| Reduction Type | Single |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Torque | 1521 lb-in |
| Output Shaft Projection | Solid Left Output |
| Torque Out @ 1150 rpm | 1575 in lb |
| Box Length | 7 3/8 in |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Input Motor HP | 1.50 |
| Rated Efficiency | 84% |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Center Distance | 2.625 in |
| Style | Right Angle |
| Use With | 726 |
| Housing Material | Cast Iron |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Input (Shaft or Bore) Size | 7/8 in |
| Material | Cast Iron, Standard Paint |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Bore Code | B7 |
| Output Configuration | Left Output |
| Box Height | 8 in |
| Media Mapping Style | F |
| Motor Frame Size | B7140TC180C |
| Output Bore Shaft Dia. | 1.125 in |
| Torque Out @ 1750 rpm | 1521 in lb |
| Family Name | F |
| Base Mounting Attachment | No Base |
| Output Shaft | Solid |
| Input Configuration | C-Face Quilled |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Output Speed | 58.3 rpm |
| Worm Position | Universal |
| Standard | AGMA Service Class I |
| Frame | 140TC, 180C |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Media Mapping Output | G |
| Motor Application | General Purpose |
| Input Power Rating | 1.68 hp, 1.253 kW |
| Weight | 41.1 LB |
| EAN or UPC | 781711520413 |
