Find a Service Center
Boston Gear
F7726-30-B7-G
700 Series 30:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #102225774
- 1.50 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
| Motor Frame Size | B7140TC180C |
| Bore Code | B7 |
| Rated Efficiency | 84% |
| Input Configuration | C-Face Quilled |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Style | Right Angle |
| Input Motor HP | 1.50 |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Torque Out @ 1150 rpm | 1575 in lb |
| Output Configuration | Left Output |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Output Speed | 58.3 rpm |
| Frame | 140TC, 180C |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Bore Shaft Dia. | 1.125 in |
| Box Width | 5.9 in |
| Torque Out @ 1750 rpm | 1521 in lb |
| Box Height | 8 in |
| Shaft Assembly Code | G |
| Output Shaft Projection | Solid Left Output |
| Fan Cooled | No |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Washdown Duty | No |
| Input Power Rating | 1.68 hp, 1.253 kW |
| Ratio | 30:1 |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Series | 700 |
| Media Mapping Output | G |
| Lubrication | None |
| Input HP @ RPM | 1.2 hp @ 1150 rpm, 1.68 hp @ 1750 rpm |
| Family Name | F |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Housing Material | Cast Iron |
| Motor Application | General Purpose |
| Output Shaft | Solid |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Use With | 726 |
| Media Mapping Style | F |
| Frame Size | 140TC, 180C |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Reduction Type | Single |
| Box Length | 7 3/8 in |
| Standard | AGMA Service Class I |
| Output Torque | 1521 lb-in |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Output Torque @ RPM | 1521 in lb @ 1750 rpm, 1575 in lb @ 1150 rpm |
| Worm Position | Universal |
| Center Distance Code | 726 |
| Material | Cast Iron, Standard Paint |
| Base Mounting Attachment | No Base |
| Center Distance | 2.625 in |
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Input (Shaft or Bore) Size | 7/8 in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520413 |
