Find a Service Center
Alternate Products
- 12 Diametral Pitch
- 14.5⁰ Pressure Angle
- 16 Teeths
- Steel Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Hub Dia. | 0.98 in |
| Outside Dia. | 1.5 in |
| Pitch Dia. | 1.333 in |
| Set Screw Size | 5/8 |
| Torque at 1200 RPM | 125 lb/in |
| Bore Dia. | 0.63 in |
| Length Through Bore | 1.250 in |
| No. of Teeth | 16 |
| Face Width | 0.75 in |
| Set Screw | Yes |
| Torque at 200 RPM | 190 lb/in |
| Pitch Diameter | 1.333 in |
| Diametral Pitch | 12 |
| O.D. | 1.5 in |
| Type | A |
| Pressure Angle | 14 1/2 degrees |
| Material | Steel |
| Outside Dia. [Min] | 1.5 in |
| Bore Type | Bored to Size |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 300 RPM | 180 lb/in |
| Origin | Finished Bore |
| Torque at 1800 RPM | 103 lb/in |
| Torque at 600 RPM | 157 lb/in |
| Rated Torque [Max] | 103 @ 1800 rpm |
| Keyway | With Keyway |
| Torque at 900 RPM | 139 lb/in |
| Bore Size | 0.625 in |
| No. of Teeths | 16 |
| Weight | 0.311 LB |
| EAN or UPC | 781711460658 |
