Find a Service Center
Alternate Products
- 10 Diametral Pitch
- 14.5⁰ Pressure Angle
- 12 Teeths
- Steel Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Torque at 600 RPM | 192 lb/in |
| Diametral Pitch | 10 |
| Set Screw | Yes |
| Set Screw Size | 5/8 |
| Bore Type | Bored to Size |
| Keyway | With Keyway |
| No. of Teeths | 12 |
| Material | Steel |
| Length Through Bore | 1.625 in |
| Hardened Teeth | Without Hardened Teeth |
| Pitch Dia. | 1.2 in |
| Torque at 900 RPM | 172 lb/in |
| Torque at 300 RPM | 218 lb/in |
| Pitch Diameter | 1.2 in |
| O.D. | 1.4 in |
| Hub Dia. | 0.92 in |
| Bore Dia. | 0.625 in |
| Bore Size | 0.625 in |
| Torque at 1200 RPM | 155 lb/in |
| Torque at 200 RPM | 229 lb/in |
| Outside Dia. [Min] | 1.4 in |
| Torque at 1800 RPM | 130 lb/in |
| Origin | Finished Bore |
| Rated Torque [Max] | 130 @ 1800 rpm |
| Pressure Angle | 14 1/2 degrees |
| No. of Teeth | 12 |
| Type | A |
| Outside Dia. | 1.4 in |
| Face Width | 1 in |
| Weight | 0.281 LB |
| EAN or UPC | 781711460818 |
