Find a Service Center
Alternate Products
- 8 Diametral Pitch
- 14.5⁰ Pressure Angle
- 20 Teeths
- Steel Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Pressure Angle | 14 1/2 degrees |
| Origin | Finished Bore |
| Torque at 1800 RPM | 372 lb/in |
| Outside Dia. [Min] | 2.75 in |
| Bore Dia. | 0.875 in |
| Pitch Diameter | 2.5 in |
| Torque at 600 RPM | 667 lb/in |
| Type | A |
| Hub Dia. | 2.05 in |
| Hardened Teeth | Without Hardened Teeth |
| Set Screw Size | 7/8 |
| O.D. | 2.75 in |
| Keyway | With Keyway |
| Pitch Dia. | 2.5 in |
| Bore Size | 0.875 in |
| Torque at 200 RPM | 907 lb/in |
| Face Width | 1.25 in |
| Outside Dia. | 2.75 in |
| Torque at 300 RPM | 832 lb/in |
| Material | Steel |
| Torque at 900 RPM | 557 lb/in |
| Set Screw | Yes |
| No. of Teeth | 20 |
| Torque at 1200 RPM | 478 lb/in |
| Diametral Pitch | 8 |
| Rated Torque [Max] | 478 @ 1200 rpm |
| No. of Teeths | 20 |
| Length Through Bore | 2.000 in |
| Bore Type | Bored to Size |
| Weight | 2.101 LB |
| EAN or UPC | 781711461020 |
