Find a Service Center
Alternate Products
- Finished Steel Gear
- 20 Diametral Pitch
- 20.0° Pressure Angle
- 35 Teeth
- 1 3/4" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- More cost effective, quieter running and metallic options
| Torque at 200 RPM | 145 lb/in |
| Set Screw | Yes |
| Set Screw Size | 1/2 |
| Torque at 300 RPM | 136 lb/in |
| Origin | Finished Bore |
| No. of Teeth | 35 |
| Outside Dia. | 1.85 in |
| Length Through Bore | 1.000 in |
| Torque at 1200 RPM | 87.5 lb/in |
| Diametral Pitch | 20 |
| Bore Type | Bored to Size |
| Torque at 1800 RPM | 70.6 lb/in |
| Pressure Angle | 20 degrees |
| Outside Dia. [Min] | 1.85 in |
| Type | A |
| Keyway | w/Setscrew |
| Torque at 900 RPM | 99.4 lb/in |
| Material | Steel |
| Pitch Diameter | 1.75 in |
| Hub Dia. | 1.47 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Size | 0.500 in |
| Torque at 600 RPM | 115 lb/in |
| Weight | 0.551 LB |
| EAN or UPC | 781711461372 |
