Find a Service Center
Alternate Products
- Finished Steel Gear
- 8 Diametral Pitch
- 20.0° Pressure Angle
- 16 Teeth
- 2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Base oil viscosity: 500 SUS @ 100 °F
- More cost effective, quieter running and metallic options
- Parallel shaft applications
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
| Torque at 1800 RPM | 431 lb/in |
| Torque at 200 RPM | 943 lb/in |
| Bore Type | Bored to Size |
| Torque at 600 RPM | 727 lb/in |
| Keyway | w/Setscrew |
| No. of Teeth | 16 |
| Material | Steel |
| Bore Size | 1.000 in |
| Pitch Diameter | 2 in |
| Outside Dia. [Min] | 2.25 in |
| Torque at 900 RPM | 620 lb/in |
| Torque at 1200 RPM | 541 lb/in |
| Diametral Pitch | 8 |
| Origin | Finished Bore |
| Set Screw Size | 1 |
| Torque at 300 RPM | 877 lb/in |
| Outside Dia. | 2.25 in |
| Hardened Teeth | Without Hardened Teeth |
| Pressure Angle | 20 degrees |
| Length Through Bore | 2.375 in |
| Set Screw | Yes |
| Type | A |
| Hub Dia. | 1.55 in |
| Weight | 1.501 LB |
| EAN or UPC | 781711461921 |
