Find a Service Center
Alternate Products
- Finished Steel Gear
- 8 Diametral Pitch
- 20.0° Pressure Angle
- 22 Teeth
- 2 3/4" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Torque at 1200 RPM | 698 lb/in |
| Bore Size | 1.000 in |
| Torque at 300 RPM | 1250 lb/in |
| Diametral Pitch | 8 |
| Hub Dia. | 2.3 in |
| Torque at 1800 RPM | 538 lb/in |
| Length Through Bore | 2.375 in |
| Hardened Teeth | Without Hardened Teeth |
| Keyway | w/Setscrew |
| Origin | Finished Bore |
| Outside Dia. [Min] | 3 in |
| Set Screw | Yes |
| Type | A |
| Pressure Angle | 20 degrees |
| Pitch Diameter | 2.75 in |
| Material | Steel |
| Outside Dia. | 3 in |
| Torque at 200 RPM | 1371 lb/in |
| No. of Teeth | 22 |
| Torque at 900 RPM | 817 lb/in |
| Bore Type | Bored to Size |
| Set Screw Size | 1 |
| Torque at 600 RPM | 989 lb/in |
| Weight | 3.251 LB |
| EAN or UPC | 781711462003 |
