Find a Service Center
- 5 Diametral Pitch
- 20⁰ Pressure Angle
- 100 Teeths
- Cast Iron Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Outside Dia. | 20.4 in |
| Keyway | N/A |
| Set Screw | N/A |
| Torque at 600 RPM | N/A |
| No. of Teeth | 100 |
| Material | Cast Iron |
| Torque at 1200 RPM | N/A |
| Hub Dia. | 4.75 in |
| Bore Size | 1.500 in |
| Pitch Dia. | 20 in |
| Hardened Teeth | Without Hardened Teeth |
| O.D. | 20.4 in |
| No. of Teeths | 100 |
| Pitch Diameter | 20 in |
| Torque at 200 RPM | 9745 lb/in |
| Diametral Pitch | 5 |
| Torque at 1800 RPM | N/A |
| Torque at 300 RPM | N/A |
| Pressure Angle | 20 degrees |
| Face Width | 2.5 in |
| Set Screw Size | N/A |
| Torque at 900 RPM | N/A |
| Rated Torque [Max] | 14288 @ 100 rpm |
| Bore Dia. | 1.5 in |
| Length Through Bore | 4.250 in |
| Outside Dia. [Min] | 20.4 in |
| Bore Type | Minimum Plain Bore |
| Origin | Reborable |
| Type | D |
| Weight | 75.301 LB |
| EAN or UPC | 781711107621 |
