Find a Service Center
- 5 Diametral Pitch
- 20⁰ Pressure Angle
- 120 Teeths
- Cast Iron Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Diametral Pitch | 5 |
| Face Width | 2.5 in |
| Pressure Angle | 20 degrees |
| Bore Type | Minimum Plain Bore |
| O.D. | 24.4 in |
| No. of Teeth | 120 |
| Bore Dia. | 1.5 in |
| Hub Dia. | 5 in |
| Pitch Dia. | 24 in |
| Set Screw Size | N/A |
| Rated Torque [Max] | 16125 @ 100 rpm |
| Outside Dia. | 24.4 in |
| Outside Dia. [Min] | 24.4 in |
| Torque at 1800 RPM | N/A |
| Keyway | N/A |
| Torque at 300 RPM | N/A |
| Bore Size | 1.500 in |
| Torque at 1200 RPM | N/A |
| Torque at 600 RPM | N/A |
| Pitch Diameter | 24 in |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 200 RPM | 10666 lb/in |
| Type | D |
| Set Screw | N/A |
| Material | Cast Iron |
| Origin | Reborable |
| Length Through Bore | 4.250 in |
| No. of Teeths | 120 |
| Torque at 900 RPM | N/A |
| Weight | 96.501 LB |
| EAN or UPC | 781711107669 |
