Find a Service Center
- Molded Delrin Material
- 12 Teeth
- 24 Diametral Pitch
- 0.583 in Outside Diameter
- 20⁰ Pressure Angle
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Torque at 200 RPM | 5.2 lb/in |
| No. of Teeths | 12 |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 0.5625 in |
| Origin | Reborable |
| Outside Dia. [Min] | 0.58 in |
| No. of Teeth | 12 |
| Torque at 900 RPM | 4.6 lb/in |
| Torque at 300 RPM | 5.1 lb/in |
| Hub Dia. | 0.38 in |
| Torque at 1800 RPM | 3.9 lb/in |
| Pitch Diameter | 0.5 in |
| Outside Dia. | 0.58 in |
| Type | A |
| Pitch Dia. | 0.5 in |
| Bore Size | 0.1875 in |
| Torque at 600 RPM | 4.8 lb/in |
| Set Screw Size | N/A |
| Diametral Pitch | 24 |
| Face Width | 0.25 in |
| Bore Type | Minimum Plain Bore |
| O.D. | 0.583 in |
| Torque at 1200 RPM | 4.3 lb/in |
| Bore Dia. | 0.188 in |
| Material | Molded Delrin |
| Set Screw | N/A |
| Pressure Angle | 20 degrees |
| Keyway | w/o Keyway, w/o Setscrew |
| Weight | 0.011 LB |
| EAN or UPC | 781711540329 |
