Find a Service Center
- 24 Diametral Pitch
- 20⁰ Pressure Angle
- 23 Teeths
- Molded Delrin Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Set Screw Size | N/A |
| Torque at 600 RPM | 11.76667 lb/in |
| Outside Dia. | 1.042 in |
| Bore Type | Minimum Plain Bore |
| Diametral Pitch | 24 |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 0.5625 in |
| Bore Size | 0.1875 in |
| Torque at 300 RPM | 13.06667 lb/in |
| Pitch Diameter | 0.958 in |
| Material | Molded Delrin |
| Bore Dia. | 0.188 in |
| Origin | Reborable |
| No. of Teeths | 23 |
| Pitch Dia. | 0.959 in |
| No. of Teeth | 23 |
| Keyway | w/o Keyway, w/o Setscrew |
| Torque at 900 RPM | 10.66667 lb/in |
| Outside Dia. [Min] | 1.042 in |
| Face Width | 0.25 in |
| Torque at 200 RPM | 13.53333 lb/in |
| Torque at 1800 RPM | 8.4 lb/in |
| Pressure Angle | 20 degrees |
| Hub Dia. | 0.55 in |
| Torque at 1200 RPM | 9.8 lb/in |
| Type | A |
| O.D. | 1.042 in |
| Set Screw | N/A |
| Weight | 0.021 LB |
| EAN or UPC | 781711540749 |
