Find a Service Center
- 32 Diametral Pitch
- 20⁰ Pressure Angle
- 15 Teeths
- Molded Delrin Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Length Through Bore | 0.498 in |
| Torque at 200 RPM | 3.233333 lb/in |
| Torque at 300 RPM | 3.133333 lb/in |
| Pitch Diameter | 0.469 in |
| Type | A |
| Outside Dia. | 0.531 in |
| Bore Dia. | 0.125 in |
| Keyway | w/o Keyway, w/o Setscrew |
| Set Screw | N/A |
| Origin | Reborable |
| Outside Dia. [Min] | 0.531 in |
| No. of Teeths | 15 |
| No. of Teeth | 15 |
| Bore Size | 0.125 in |
| Torque at 1800 RPM | 2.366667 lb/in |
| Face Width | 0.188 in |
| O.D. | 0.531 in |
| Hub Dia. | 0.31 in |
| Material | Molded Delrin |
| Torque at 600 RPM | 2.933333 lb/in |
| Pitch Dia. | 0.469 in |
| Set Screw Size | N/A |
| Torque at 900 RPM | 2.733333 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Pressure Angle | 20 degrees |
| Bore Type | Minimum Plain Bore |
| Torque at 1200 RPM | 2.633333 lb/in |
| Diametral Pitch | 32 |
| Weight | 0.011 LB |
| EAN or UPC | 781711540091 |
