S1BCH170MMFL

S1 Series Standard-Duty Pillow Block

Item #101006375

Clamping Ring Collar

Triple Labyrinth Seals

Expansion Type

S1 Series

+ Show More

Auto Replenish

each One-time purchase

Product Details

Craft bearings are split cylindrical roller bearings, which combine all the advantages of conventional antifriction roller bearings with the added feature of being easily assembled around a shaft.

Engineered in halves to ease installation, inspection, and/or replacement of pillow block bearings without removing or disrupting other elements of the system
Cartridge and housing assemblies made of quality ductile iron
ID of housing is spherically machined to accept cartridge assembly
Base-to-center height meets and is sometimes less than industry standard
All hardware used in assembly of the Craft pillow block is of American standard type
Bearings, cartridges, and housings of same series and grouping are interchangeable
O.D. of cartridge is spherically machined to accommodate initial shaft misalignment, allowing bearing and cartridge assembly to align externally
Seal remains on parallel axis with shaft, maintaining a 100% seal along shaft

The side pusher screws must be backed off before attempting to remove outer races

Specifications

Locking Device	Clamping Ring Collar
Radial Internal Clearance Specification	Normal Clearance
Lubrication	Relubricatable
Base Height	1 3/8 in
Base Width	7 1/2 in
Housing Height	18 1/2 in
Bolt Size	1 (4)
Bolt Hole Spacing Range [Min]	14 3/4 in
Housing Material	Ductile Iron
Pillow Block Type	Thru-Bolt
Base Length	21 in
Bolt Hole Spacing	15 1/4 in
Bolt Holes	4
Seal Type	Triple Labyrinth Seals
Bolt Hole Spacing Range [Max]	15 3/4 in
Pedestal	PH 12
End Type	Open End
Bearing Design	Expansion
Housing Construction	2 Piece
Inch/Metric	Metric Bore
Shaft Dia.	170 mm
Mounted Unit Duty	Normal-Duty
Bearing Type	Split Cylindrical Bearing
Bolt Hole Spacing - Width	5 in
Weight	283.0 LB