S2BCH1000FL

S2 Series Standard-Duty Pillow Block

Item #101007550

Clamping Ring Collar

Triple Labyrinth Seals

Expansion Type

S2 Series

+ Show More

Auto Replenish

each One-time purchase

Product Details

Craft bearings are split cylindrical roller bearings, which combine all the advantages of conventional antifriction roller bearings with the added feature of being easily assembled around a shaft.

Engineered in halves to ease installation, inspection, and/or replacement of pillow block bearings without removing or disrupting other elements of the system
Cartridge and housing assemblies made of quality ductile iron
ID of housing is spherically machined to accept cartridge assembly
Base-to-center height meets and is sometimes less than industry standard
All hardware used in assembly of the Craft pillow block is of American standard type
Bearings, cartridges, and housings of same series and grouping are interchangeable
O.D. of cartridge is spherically machined to accommodate initial shaft misalignment, allowing bearing and cartridge assembly to align externally
Seal remains on parallel axis with shaft, maintaining a 100% seal along shaft

The side pusher screws must be backed off before attempting to remove outer races

Specifications

Base Length	32 in
Mounted Unit Duty	Normal-Duty
Inch/Metric	Inch Bore
Seal Type	Triple Labyrinth Seals
Bolt Holes	4
Housing Construction	2 Piece
Bolt Size	1 1/4 (4)
Locking Device	Clamping Ring Collar
Shaft Dia.	10 in
Bolt Hole Spacing Range [Max]	24 1/4 in
Bearing Design	Expansion
Radial Internal Clearance Specification	Normal Clearance
Lubrication	Relubricatable
Bolt Hole Spacing	23 1/2 in
Pillow Block Type	Thru-Bolt
Base Height	2 1/8 in
Bearing Type	Split Cylindrical Bearing
Bolt Hole Spacing - Width	8 in
Base Width	11 1/2 in
Bolt Hole Spacing Range [Min]	22.75
Housing Height	28 in
End Type	Open End
Housing Material	Ductile Iron
Pedestal	PH 26
Weight	938.0 LB