S2BCH200MMFL

S2 Series Standard-Duty Pillow Block

Item #101007511

Clamping Ring Collar

Triple Labyrinth Seals

Expansion Type

S2 Series

+ Show More

Auto Replenish

each One-time purchase

Product Details

Craft bearings are split cylindrical roller bearings, which combine all the advantages of conventional antifriction roller bearings with the added feature of being easily assembled around a shaft.

Engineered in halves to ease installation, inspection, and/or replacement of pillow block bearings without removing or disrupting other elements of the system
Cartridge and housing assemblies made of quality ductile iron
ID of housing is spherically machined to accept cartridge assembly
Base-to-center height meets and is sometimes less than industry standard
All hardware used in assembly of the Craft pillow block is of American standard type
Bearings, cartridges, and housings of same series and grouping are interchangeable
O.D. of cartridge is spherically machined to accommodate initial shaft misalignment, allowing bearing and cartridge assembly to align externally
Seal remains on parallel axis with shaft, maintaining a 100% seal along shaft

The side pusher screws must be backed off before attempting to remove outer races

Specifications

End Type	Open End
Pedestal	PH 24
Base Width	10 1/2 in
Housing Construction	2 Piece
Radial Internal Clearance Specification	Normal Clearance
Base Length	27 in
Bolt Hole Spacing Range [Min]	19.25
Shaft Dia.	200 mm
Mounted Unit Duty	Normal-Duty
Lubrication	Relubricatable
Bolt Hole Spacing Range [Max]	20 3/4 in
Seal Type	Triple Labyrinth Seals
Bolt Holes	4
Housing Material	Ductile Iron
Base Height	2 in
Bolt Hole Spacing - Width	7.5 in
Housing Height	24 in
Inch/Metric	Metric Bore
Bearing Design	Expansion
Pillow Block Type	Thru-Bolt
Locking Device	Clamping Ring Collar
Bolt Hole Spacing	20 in
Bearing Type	Split Cylindrical Bearing
Bolt Size	1 1/4 (4)
Weight	646.0 LB