Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Port Type | NPTF |
| Port Location | Side Port |
| Port Size | 1/2-14 |
| RPM [Max] | 969 rpm |
| Series | H Series |
| Displacement (in³/rev) | 2.8 |
| Seal Options | Standard |
| Splines | 0 |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Seal Material | Buna-N |
| Viscosity Recommendation | 455 Saybold Universal Second |
| Design Code | 9 |
| Port Code | B |
| Pressure [Max] | 1800 psi |
| Port Size & Location | 1/2 in NPTF Side |
| Corrosion Resistant | No |
| Mount Type | 4 Bolt |
| RPM [Min] | 969 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 01 |
| Duty | Standard-Duty |
| Shaft Type | Straight w/ Woodruff Key |
| Material | Cast Iron |
| Paint | Primer Low Gloss Black |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Rotation | Standard Rotation |
| Flow [Max] | 12 gal/min |
| Mounting Holes | 3/8-16 |
| Case Drain | None |
| Front Seal Kit If Available | 60540-000 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Displacement | 46 cm3/Rev |
| Recommended System Working Temperature [Max] | 180 °F |
| Mounting Type Code | B |
| Bolt Circle Dia. | 3 1/4 in |
| Motor Element | Gerotor |
| Paint Code | A |
| Output Shaft Type | Straight |
| Intermittent Pressure [Max] | 165 bar |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 1.75 in |
| Torque | 54.02 Nm |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Motor Type | Spool Valve |
| Flow Rate | 45.77 lpm |
| Brake Type | Hydraulic |
| Case Drain Code | 0 |
| Recommended System Working Temperature [Min] | -30 °F |
| Flange Orientation | Standard |
| Weight | 11.035 LB |
