Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Paint | Low Gloss Black 2 Mils Min Thick |
| Flange Orientation | Standard |
| RPM [Min] | 353 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Recommended System Working Temperature [Min] | -30 °F |
| Port Code | B |
| Rotation | Standard Rotation |
| Torque | 233 Nm |
| RPM [Max] | 353 rpm |
| Intermittent Pressure [Max] | 155 bar |
| Displacement (in³/rev) | 9.7 |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow [Max] | 15 gal/min |
| Displacement | 159 cm3/Rev |
| Flow Rate | 57 lpm |
| Port Type | NPTF |
| Motor Type | Spool Valve |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Port Size & Location | 1/2 in NPTF Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 1.75 in |
| Seal Options | Standard |
| Mounting Holes | 3/8-16 |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain | None |
| Duty | Standard-Duty |
| Recommended System Working Temperature [Max] | 180 °F |
| Series | H Series |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Output Shaft Type | Straight |
| Pressure [Max] | 1650 psi |
| Front Seal Kit If Available | 60540-000 |
| Corrosion Resistant | No |
| Special Features Hardware Code | 00 |
| Mount Type | 4 Bolt |
| Paint Code | J |
| Mounting Type Code | B |
| Brake Type | Hydraulic |
| Output Shaft Code | 01 |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Shaft Type | Straight w/ Woodruff Key |
| Port Location | Side Port |
| Case Drain Code | 0 |
| Design Code | 9 |
| Port Size | 1/2-14 |
| Seal Material | Buna-N |
| Weight | 12.5 LB |
