Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| RPM [Min] | 304 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | 1/2-14 |
| Mounting Type Code | B |
| Brake Type | Hydraulic |
| Port Code | B |
| Material | Cast Iron |
| Displacement (in³/rev) | 11.3 |
| Bolt Circle Dia. | 3 1/4 in |
| Rotation | Standard Rotation |
| Front Seal Kit If Available | 60540-000 |
| Recommended System Working Temperature [Min] | -30 °F |
| Series | H Series |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Seal Material | Buna-N |
| Splines | 0 |
| Corrosion Resistant | No |
| Pilot Diameter | 1.75 in |
| Mounting Holes | 3/8-16 |
| Motor Type | Spool Valve |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Paint | Low Gloss Black 2 Mils Min Thick |
| Displacement | 185 cm3/Rev |
| Output Shaft Type | Straight |
| Port Size & Location | 1/2 in NPTF Side |
| Paint Code | J |
| RPM [Max] | 304 rpm |
| Flange Orientation | Standard |
| Seal Options | Standard |
| Pressure [Max] | 1600 psi |
| Case Drain | None |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Special Features Assembly Code | 0 |
| Design Code | 9 |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 01 |
| Flow [Max] | 15 gal/min |
| Port Location | Side Port |
| Recommended System Working Temperature [Max] | 180 °F |
| Inlet Pressure [Max] | 2500 psi |
| Intermittent Pressure [Max] | 148 bar |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Port Type | NPTF |
| Flow Rate | 57 lpm |
| Torque | 265 Nm |
| Mount Type | 4 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Weight | 12.5 LB |
