Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Port Type | NPTF |
| Corrosion Resistant | No |
| Output Shaft Code | 01 |
| Pilot Diameter | 1.75 in |
| Torque | 265 Nm |
| Brake Type | Hydraulic |
| Recommended System Working Temperature [Min] | -30 °F |
| Series | H Series |
| Output Shaft Type | Straight |
| Shaft Type | Straight w/ Woodruff Key |
| Flow Rate | 57 lpm |
| Recommended System Working Temperature [Max] | 180 °F |
| Rotation | Standard Rotation |
| RPM [Max] | 304 rpm |
| Flow [Max] | 15 gal/min |
| Port Code | B |
| Bolt Circle Dia. | 3 1/4 in |
| Flange Orientation | Standard |
| Paint | Low Gloss Black 2 Mils Min Thick |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Displacement (in³/rev) | 11.3 |
| Case Drain | None |
| Seal Material | Buna-N |
| Splines | 0 |
| Intermittent Pressure [Max] | 148 bar |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Pressure [Max] | 1600 psi |
| Mounting Type Code | B |
| Mount Type | 4 Bolt |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Front Seal Kit If Available | 60540-000 |
| Port Size | 1/2-14 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Material | Cast Iron |
| Port Size & Location | 1/2 in NPTF Side |
| Design Code | 9 |
| Paint Code | J |
| Mounting Holes | 3/8-16 |
| Seal Options | Standard |
| Displacement | 185 cm3/Rev |
| Port Location | Side Port |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 304 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Weight | 12.5 LB |
