Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Recommended System Working Temperature [Min] | -30 °F |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 11.3 |
| Pilot Diameter | 1.75 in |
| Paint | Low Gloss Black 2 Mils Min Thick |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 3 1/4 in |
| Paint Code | J |
| Port Size & Location | 1/2 in NPTF Side |
| Corrosion Resistant | No |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | B |
| Pressure [Max] | 1600 psi |
| Intermittent Pressure [Max] | 148 bar |
| Output Shaft Type | Straight |
| Series | H Series |
| Design Code | 9 |
| Shaft Type | Straight w/ Woodruff Key |
| RPM [Min] | 304 rpm |
| RPM [Max] | 304 rpm |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Material | Cast Iron |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Port Location | Side Port |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Output Shaft Code | 01 |
| Displacement | 185 cm3/Rev |
| Recommended System Working Temperature [Max] | 180 °F |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Torque | 265 Nm |
| Front Seal Kit If Available | 60540-000 |
| Mounting Holes | 3/8-16 |
| Case Drain | None |
| Seal Options | Standard |
| Splines | 0 |
| Duty | Standard-Duty |
| Port Size | 1/2-14 |
| Brake Type | Hydraulic |
| Case Drain Code | 0 |
| Flow Rate | 57 lpm |
| Seal Material | Buna-N |
| Port Type | NPTF |
| Mounting Type Code | B |
| Flow [Max] | 15 gal/min |
| Mount Type | 4 Bolt |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Weight | 12.5 LB |
