Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Output Shaft Code | 01 |
| Splines | 0 |
| Case Drain | None |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Design Code | 9 |
| Port Size | 1/2-14 |
| Mounting Holes | 3/8-16 |
| Flange Orientation | Standard |
| Pilot Diameter | 1.75 in |
| Recommended System Working Temperature [Min] | -30 °F |
| Motor Element | Gerotor |
| Paint Code | A |
| Corrosion Resistant | No |
| Paint | Primer Low Gloss Black |
| Shaft Type | Straight w/ Woodruff Key |
| Port Code | B |
| Seal Material | Buna-N |
| Recommended System Working Temperature [Max] | 180 °F |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 4 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Pressure [Max] | 1450 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Series | H Series |
| RPM [Min] | 243 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Output Shaft Type | Straight |
| Flow Rate | 57 lpm |
| Brake Type | Hydraulic |
| Port Location | Side Port |
| Case Drain Code | 0 |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 243 rpm |
| Special Features Assembly Code | 0 |
| Front Seal Kit If Available | 60540-000 |
| Displacement (in³/rev) | 14.1 |
| Displacement | 231 cm3/Rev |
| Port Type | NPTF |
| Intermittent Pressure [Max] | 138 bar |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Torque | 302 Nm |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Mounting Type Code | B |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Hardware Code | 00 |
| Seal Options | Standard |
| Weight | 13.3 LB |
