Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Case Drain Code | 0 |
| Mounting Type Code | B |
| Pilot Diameter | 1.75 in |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Paint Code | A |
| Seal Options | Standard |
| Output Shaft Code | 01 |
| Design Code | 9 |
| Port Size | 1/2-14 |
| Special Features Hardware Code | 00 |
| Output Shaft Type | Straight |
| Flow Rate | 57 lpm |
| Intermittent Pressure [Max] | 124 bar |
| Port Code | B |
| Bolt Circle Dia. | 3 1/4 in |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 17.94 |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Motor Type | Spool Valve |
| Port Location | Side Port |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flange Orientation | Standard |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain | None |
| Mounting Holes | 3/8-16 |
| RPM [Min] | 192 rpm |
| Motor Element | Gerotor |
| Recommended System Working Temperature [Max] | 180 °F |
| Duty | Standard-Duty |
| Brake Type | Hydraulic |
| Corrosion Resistant | No |
| Series | H Series |
| Front Seal Kit If Available | 60540-000 |
| Port Type | NPTF |
| Torque | 351 Nm |
| Flow [Max] | 15 gal/min |
| Recommended System Working Temperature [Min] | -30 °F |
| Port Size & Location | 1/2 in NPTF Side |
| Paint | Primer Low Gloss Black |
| Seal Material | Buna-N |
| Pressure [Max] | 1350 psi |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Displacement | 294 cm3/Rev |
| Splines | 0 |
| Mount Type | 4 Bolt |
| RPM [Max] | 192 rpm |
| Weight | 13.65 LB |
