Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Port Type | NPTF |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Output Shaft Type | Straight |
| Port Code | B |
| Material | Cast Iron |
| Pressure [Max] | 1250 psi |
| Mount Type | 4 Bolt |
| Case Drain | None |
| Port Location | Side Port |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Holes | 3/8-16 |
| Recommended System Working Temperature [Min] | -30 °F |
| Brake Type | Hydraulic |
| Splines | 0 |
| Front Seal Kit If Available | 60540-000 |
| Flange Orientation | Standard |
| Pilot Diameter | 1.75 in |
| Flow [Max] | 15 gal/min |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 22.6 |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 01 |
| Paint | Primer Low Gloss Black |
| Mounting Type Code | B |
| Seal Options | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Port Size | 1/2-14 |
| Corrosion Resistant | No |
| Flow Rate | 57 lpm |
| Series | H Series |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Min] | 152 rpm |
| Torque | 407 Nm |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Design Code | 9 |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Rotation | Standard Rotation |
| Recommended System Working Temperature [Max] | 180 °F |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Displacement | 370 cm3/Rev |
| Intermittent Pressure [Max] | 103 bar |
| Paint Code | A |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Hole Size | 3/8-16 UNC-2B |
| RPM [Max] | 152 rpm |
| Weight | 14.55 LB |
