Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Rotation | Standard Rotation |
| Motor Type | Spool Valve |
| Case Drain | None |
| RPM [Max] | 969 rpm |
| RPM [Min] | 969 rpm |
| Motor Element | Gerotor |
| Paint | Primer Low Gloss Black |
| Special Features Assembly Code | 0 |
| Torque | 73 Nm |
| Front Seal Kit If Available | 60540-000 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Output Shaft Type | Straight |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow [Max] | 12 gal/min |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Seal Options | Standard |
| Port Size & Location | SAE-10 Side |
| Bolt Circle Dia. | 3 1/4 in |
| Brake Type | Hydraulic |
| Series | H Series |
| Design Code | 9 |
| Mounting Holes | 3/8-16 |
| Port Location | Side Port |
| Port Code | A |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Pilot Diameter | 1.75 in |
| Pressure [Max] | 1800 psi |
| Displacement (in³/rev) | 2.81 |
| Flow Rate | 45 lpm |
| Output Shaft Code | 01 |
| Corrosion Resistant | No |
| Paint Code | A |
| Port Size | 7/8-14 |
| Splines | 0 |
| Displacement | 46 cm3/Rev |
| Shaft Type | Straight w/ Woodruff Key |
| Intermittent Pressure [Max] | 165 bar |
| Recommended System Working Temperature [Min] | -30 °F |
| Mounting Type Code | B |
| Port Type | SAE O-Ring |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Mount Type | 4 Bolt |
| Recommended System Working Temperature [Max] | 180 °F |
| Weight | 11.2 LB |
