Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| RPM [Max] | 760 rpm |
| Material | Cast Iron |
| Bolt Circle Dia. | 3 1/4 in |
| Intermittent Pressure [Max] | 165 bar |
| Mounting Holes | 3/8-16 |
| Displacement | 74 cm3/Rev |
| Front Seal Kit If Available | 60540-000 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 57 lpm |
| Motor Type | Spool Valve |
| RPM [Min] | 760 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Corrosion Resistant | No |
| Output Shaft Type | Straight |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Torque | 118 Nm |
| Design Code | 9 |
| Seal Options | Standard |
| Port Code | A |
| Brake Type | Hydraulic |
| Recommended System Working Temperature [Min] | -30 °F |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Port Size | 7/8-14 |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Pressure [Max] | 1800 psi |
| Mounting Type Code | B |
| Series | H Series |
| Case Drain Code | 0 |
| Output Shaft Code | 01 |
| Flange Orientation | Standard |
| Case Drain | None |
| Special Features Hardware Code | 00 |
| Seal Material | Buna-N |
| Port Size & Location | SAE-10 Side |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 1.75 in |
| Duty | Standard-Duty |
| Rotation | Standard Rotation |
| Mount Type | 4 Bolt |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Motor Element | Gerotor |
| Splines | 0 |
| Displacement (in³/rev) | 4.5 |
| Paint | Primer Low Gloss Black |
| Port Type | SAE O-Ring |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Recommended System Working Temperature [Max] | 180 °F |
| Weight | 11.1 LB |
