Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| RPM [Min] | 760 rpm |
| Corrosion Resistant | No |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Design Code | 9 |
| Output Shaft Code | 01 |
| Pressure [Max] | 1800 psi |
| Recommended System Working Temperature [Min] | -30 °F |
| Port Size | 7/8-14 |
| Special Features Assembly Code | 0 |
| RPM [Max] | 760 rpm |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Port Code | A |
| Port Type | SAE O-Ring |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Bolt Circle Dia. | 3 1/4 in |
| Seal Options | Standard |
| Front Seal Kit If Available | 60540-000 |
| Displacement (in³/rev) | 4.5 |
| Motor Element | Gerotor |
| Port Size & Location | SAE-10 Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain | None |
| Paint | Primer Low Gloss Black |
| Displacement | 74 cm3/Rev |
| Special Features Hardware Code | 00 |
| Port Location | Side Port |
| Recommended System Working Temperature [Max] | 180 °F |
| Flange Orientation | Standard |
| Pilot Diameter | 1.75 in |
| Brake Type | Hydraulic |
| Series | H Series |
| Seal Material | Buna-N |
| Mount Type | 4 Bolt |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Material | Cast Iron |
| Torque | 118 Nm |
| Intermittent Pressure [Max] | 165 bar |
| Mounting Holes | 3/8-16 |
| Flow Rate | 57 lpm |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Mounting Type Code | B |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Shaft Type | Straight |
| Motor Type | Spool Valve |
| Weight | 11.1 LB |
