Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Pressure [Max] | 1600 psi |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Bolt Circle Dia. | 3 1/4 in |
| Corrosion Resistant | No |
| Design Code | 9 |
| Rotation | Standard Rotation |
| Port Size & Location | SAE-10 Side |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Displacement | 185 cm3/Rev |
| Splines | 0 |
| Paint Code | A |
| Output Shaft Type | Straight |
| Motor Type | Spool Valve |
| Output Shaft Code | 01 |
| Series | H Series |
| Flow Rate | 57 lpm |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Seal Material | Buna-N |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Type | SAE O-Ring |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Displacement (in³/rev) | 11.3 |
| RPM [Max] | 304 rpm |
| Intermittent Pressure [Max] | 148 bar |
| RPM [Min] | 304 rpm |
| Seal Options | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Port Size | 7/8-14 |
| Paint | Primer Low Gloss Black |
| Port Location | Side Port |
| Port Code | A |
| Case Drain | None |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Special Features Assembly Code | 0 |
| Mount Type | 4 Bolt |
| Recommended System Working Temperature [Min] | -30 °F |
| Mounting Holes | 3/8-16 |
| Case Drain Code | 0 |
| Special Features Hardware Code | 00 |
| Recommended System Working Temperature [Max] | 180 °F |
| Pilot Diameter | 1.75 in |
| Front Seal Kit If Available | 60540-000 |
| Mounting Type Code | B |
| Duty | Standard-Duty |
| Brake Type | Hydraulic |
| Flow [Max] | 15 gal/min |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Torque | 265 Nm |
| Weight | 12.45 LB |
