Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| RPM [Min] | 192 rpm |
| Port Size & Location | SAE-10 Side |
| Output Shaft Code | 01 |
| Output Shaft Type | Straight |
| Displacement | 294 cm3/Rev |
| Displacement (in³/rev) | 17.94 |
| Case Drain | None |
| Intermittent Pressure [Max] | 124 bar |
| Recommended System Working Temperature [Max] | 180 °F |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 57 lpm |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Flange Orientation | Standard |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Port Location | Side Port |
| Front Seal Kit If Available | 60540-000 |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Recommended System Working Temperature [Min] | -30 °F |
| Pressure [Max] | 1350 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 1.75 in |
| Port Type | SAE O-Ring |
| Seal Material | Buna-N |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Seal Options | Standard |
| Shaft Type | Straight w/ Woodruff Key |
| Brake Type | Hydraulic |
| Paint Code | J |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Paint | Low Gloss Black 2 Mils Min Thick |
| Mounting Type Code | B |
| Flow [Max] | 15 gal/min |
| Mount Type | 4 Bolt |
| Torque | 351 Nm |
| Rotation | Standard Rotation |
| Design Code | 9 |
| Port Size | 7/8-14 |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Mounting Holes | 3/8-16 |
| RPM [Max] | 192 rpm |
| Material | Cast Iron |
| Series | H Series |
| Inlet Pressure [Max] | 2500 psi |
| Motor Element | Gerotor |
| Case Drain Code | 0 |
| Port Code | A |
| Weight | 13.6 LB |
