Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Flow Rate | 57 lpm |
| Front Seal Kit If Available | 60540-000 |
| Special Features Hardware Code | 00 |
| Torque | 407 Nm |
| Seal Material | Buna-N |
| Splines | 0 |
| Port Code | A |
| Motor Element | Gerotor |
| Intermittent Pressure [Max] | 103 bar |
| Output Shaft Type | Straight |
| Port Location | Side Port |
| Mounting Holes | 3/8-16 |
| Bolt Circle Dia. | 3 1/4 in |
| Displacement (in³/rev) | 22.6 |
| Recommended System Working Temperature [Min] | -30 °F |
| Seal Options | Standard |
| RPM [Min] | 152 rpm |
| Corrosion Resistant | No |
| Paint | Primer Low Gloss Black |
| Case Drain | None |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Material | Cast Iron |
| Design Code | 9 |
| Mount Type | 4 Bolt |
| Rotation | Standard Rotation |
| Port Size | 7/8-14 |
| Brake Type | Hydraulic |
| Pressure [Max] | 1250 psi |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Case Drain Code | 0 |
| Paint Code | A |
| RPM [Max] | 152 rpm |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Mounting Type Code | B |
| Port Type | SAE O-Ring |
| Displacement | 370 cm3/Rev |
| Pilot Diameter | 1.75 in |
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Output Shaft Code | 01 |
| Series | H Series |
| Recommended System Working Temperature [Max] | 180 °F |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Assembly Code | 0 |
| Flow [Max] | 15 gal/min |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Size & Location | SAE-10 Side |
| Flange Orientation | Standard |
| Weight | 14.36 LB |
