Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 4 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Port Type | Manifold, O-Ring |
| Special Features Assembly Code | 0 |
| Front Seal Kit If Available | 60540-000 |
| Special Features Hardware Code | 00 |
| Mounting Holes | 3/8-16 |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 3 1/4 in |
| Recommended System Working Temperature [Min] | -30 °F |
| Brake Type | Hydraulic |
| Port Size & Location | Manifold, 5/16-18 Side |
| Splines | 0 |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Duty | Standard-Duty |
| Output Shaft Code | 01 |
| Paint Code | A |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Flange Orientation | Standard |
| Flow Rate | 57 lpm |
| Mounting Type Code | B |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 4.5 |
| Torque | 118 Nm |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Pilot Diameter | 1.75 in |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1800 psi |
| RPM [Max] | 760 rpm |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Port Code | C |
| Output Shaft Type | Straight |
| Paint | Primer Low Gloss Black |
| Intermittent Pressure [Max] | 165 bar |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Series | H Series |
| Case Drain Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Recommended System Working Temperature [Max] | 180 °F |
| Seal Material | Buna-N |
| Mount Type | 4 Bolt |
| Seal Options | Standard |
| Displacement | 74 cm3/Rev |
| Motor Type | Spool Valve |
| RPM [Min] | 760 rpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Design Code | 9 |
| Case Drain | None |
| Inlet Pressure [Max] | 2500 psi |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Woodruff Key |
| Weight | 11.35 LB |
