Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 4 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Pressure [Max] | 1450 psi |
| Splines | 0 |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Flange Orientation | Standard |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| RPM [Max] | 243 rpm |
| Port Location | Side Port |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Min] | 243 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Holes | 3/8-16 |
| Output Shaft Code | 01 |
| Motor Element | Gerotor |
| Special Features Assembly Code | 0 |
| Torque | 302 Nm |
| Paint Code | A |
| Port Type | Manifold, O-Ring |
| Mounting Type Code | B |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 3 1/4 in |
| Pilot Diameter | 1.75 in |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Flow Rate | 57 lpm |
| Paint | Primer Low Gloss Black |
| Inlet Pressure [Max] | 2500 psi |
| Intermittent Pressure [Max] | 138 bar |
| Mount Type | 4 Bolt |
| Shaft Type | Straight w/ Woodruff Key |
| Displacement | 231 cm3/Rev |
| Case Drain | None |
| Displacement (in³/rev) | 14.1 |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Special Features | None |
| Rotation | Standard Rotation |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Port Code | C |
| Weight | 13.3 LB |
