Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| RPM [Max] | 585 rpm |
| Port Code | B |
| Displacement | 96 cm3/Rev |
| Material | Cast Iron |
| Special Features Hardware Code | 00 |
| Port Size & Location | 1/2 in NPTF Side |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Flow Rate | 57 lpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Intermittent Pressure [Max] | 165 bar |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Pressure [Max] | 1800 psi |
| Front Seal Kit If Available | 60540-000 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Recommended System Working Temperature [Max] | 180 °F |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | NPTF |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Splines | 0 |
| Design Code | 9 |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Torque | 155 Nm |
| RPM [Min] | 585 rpm |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 5.9 |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Series | H Series |
| Pilot Diameter | 3.25 in |
| Bolt Circle Dia. | 4.19 in |
| Seal Options | Standard |
| Case Drain | None |
| Port Size | 1/2-14 |
| Output Shaft Type | Straight |
| Brake Type | Hydraulic |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Shaft Type | Straight w/ Woodruff Key |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Paint | Primer Low Gloss Black |
| Output Shaft Code | 01 |
| Motor Element | Gerotor |
| Paint Code | A |
| Mounting Hole Size | 0.54 in |
| Case Drain Code | 0 |
| Recommended System Working Temperature [Min] | -30 °F |
| Mounting Holes | 0.535 in |
| Weight | 12.25 LB |
