Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 14.1 |
| Special Features Hardware Code | 00 |
| Torque | 302 Nm |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Brake Type | Hydraulic |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Port Type | NPTF |
| RPM [Max] | 243 rpm |
| Case Drain Code | 0 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.54 in |
| Intermittent Pressure [Max] | 138 bar |
| Mount Type | 2 Bolt |
| Design Code | 9 |
| Displacement | 231 cm3/Rev |
| Seal Material | Buna-N |
| Pilot Diameter | 3.25 in |
| Case Drain | None |
| Shaft Type | Straight w/ Woodruff Key |
| Splines | 0 |
| Paint | Primer Low Gloss Black |
| Port Size | 1/2-14 |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.187 in |
| Front Seal Kit If Available | 60540-000 |
| Port Location | Side Port |
| Recommended System Working Temperature [Min] | -30 °F |
| Output Torque at Rated PSI (inch/pounds) | 2673 in lb |
| Pressure [Max] | 1450 psi |
| Output Shaft Code | 01 |
| Material | Cast Iron |
| Flow Rate | 57 lpm |
| Port Size & Location | 1/2 in NPTF Side |
| Series | H Series |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Port Code | B |
| Output Shaft Type | Straight |
| Mounting Type Code | A |
| Recommended System Working Temperature [Max] | 180 °F |
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Seal Options | Standard |
| Paint Code | A |
| RPM [Min] | 243 rpm |
| Weight | 13.75 LB |
