Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Pilot Diameter | 3.25 in |
| Seal Options | Standard |
| Torque | 73 Nm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Type Code | A |
| Splines | 0 |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Pressure [Max] | 1800 psi |
| Flow Rate | 45 lpm |
| Paint Code | A |
| Bolt Circle Dia. | 4.187 in |
| Case Drain Code | 0 |
| Output Shaft Code | 01 |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Port Code | A |
| RPM [Max] | 969 rpm |
| Intermittent Pressure [Max] | 165 bar |
| Mounting Holes | 0.535 in |
| Output Shaft Type | Straight |
| Duty | Standard-Duty |
| Brake Type | Hydraulic |
| Port Location | Side Port |
| Port Size | 7/8-14 |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Design Code | 9 |
| RPM [Min] | 969 rpm |
| Displacement | 46 cm3/Rev |
| Front Seal Kit If Available | 60540-000 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.54 in |
| Mount Type | 2 Bolt |
| Material | Cast Iron |
| Port Size & Location | SAE-10 Side |
| Displacement (in³/rev) | 2.81 |
| Motor Type | Spool Valve |
| Recommended System Working Temperature [Min] | -30 °F |
| Corrosion Resistant | No |
| Recommended System Working Temperature [Max] | 180 °F |
| Flow [Max] | 12 gal/min |
| Paint | Primer Low Gloss Black |
| Flange Orientation | Standard |
| Port Type | SAE O-Ring |
| Series | H Series |
| Case Drain | None |
| Special Features Assembly Code | 0 |
| Weight | 11.2 LB |
