Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Seal Material | Buna-N |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Port Code | A |
| RPM [Min] | 353 rpm |
| Output Shaft Type | Straight |
| Design Code | 9 |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 0.54 in |
| Pressure [Max] | 1650 psi |
| Case Drain Code | 0 |
| Paint | Low Gloss Black 2 Mils Min Thick |
| Displacement (in³/rev) | 9.7 |
| Series | H Series |
| Material | Cast Iron |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Brake Type | Hydraulic |
| Splines | 0 |
| Special Features Hardware Code | 00 |
| Front Seal Kit If Available | 60540-000 |
| Paint Code | J |
| Bolt Circle Dia. | 4.19 in |
| Motor Element | Gerotor |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Displacement | 159 cm3/Rev |
| Port Size & Location | SAE-10 Side |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 01 |
| Port Type | SAE O-Ring |
| Port Location | Side Port |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | A |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Recommended System Working Temperature [Min] | -30 °F |
| Seal Options | Standard |
| RPM [Max] | 353 rpm |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Torque | 233 Nm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Intermittent Pressure [Max] | 155 bar |
| Flow Rate | 57 lpm |
| Case Drain | None |
| Port Size | 7/8-14 |
| Recommended System Working Temperature [Max] | 180 °F |
| Weight | 12.928 LB |
