Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Flow Rate | 57 lpm |
| Port Size & Location | SAE-10 Side |
| RPM [Max] | 243 rpm |
| Front Seal Kit If Available | 60540-000 |
| Motor Element | Gerotor |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Inlet Pressure [Max] | 2500 psi |
| Port Size | 7/8-14 |
| Pilot Diameter | 3.25 in |
| Brake Type | Hydraulic |
| Special Features Assembly Code | 0 |
| Mounting Hole Size | 0.54 in |
| Pressure [Max] | 1450 psi |
| Design Code | 9 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Displacement (in³/rev) | 14.1 |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Displacement | 231 cm3/Rev |
| Port Code | A |
| Recommended System Working Temperature [Min] | -30 °F |
| Intermittent Pressure [Max] | 138 bar |
| Special Features Hardware Code | 00 |
| Paint | Primer Low Gloss Black |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Port Location | Side Port |
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain | None |
| Mounting Type Code | A |
| Output Shaft Code | 01 |
| Torque | 302 Nm |
| Seal Options | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow [Max] | 15 gal/min |
| Output Shaft Type | Straight |
| Material | Cast Iron |
| Paint Code | A |
| Mount Type | 2 Bolt |
| Recommended System Working Temperature [Max] | 180 °F |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 4.19 in |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Port Type | SAE O-Ring |
| RPM [Min] | 243 rpm |
| Splines | 0 |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Weight | 13.3 LB |
