Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Output Shaft Code | 01 |
| Case Drain | None |
| Duty | Standard-Duty |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Type | SAE O-Ring |
| Pilot Diameter | 3.25 in |
| Corrosion Resistant | No |
| Series | H Series |
| Material | Cast Iron |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Type | Straight |
| Rotation | Standard Rotation |
| Bolt Circle Dia. | 4.187 in |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Recommended System Working Temperature [Max] | 180 °F |
| Intermittent Pressure [Max] | 103 bar |
| Design Code | 9 |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Port Code | A |
| Flange Orientation | Standard |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Brake Type | Hydraulic |
| Motor Type | Spool Valve |
| Port Size & Location | SAE-10 Side |
| Splines | 0 |
| RPM [Max] | 152 rpm |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Displacement | 370 cm3/Rev |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow Rate | 57 lpm |
| Mounting Type Code | A |
| RPM [Min] | 152 rpm |
| Case Drain Code | 0 |
| Torque | 407 Nm |
| Shaft Type | Straight w/ Woodruff Key |
| Port Location | Side Port |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 22.58 |
| Paint | Primer Low Gloss Black |
| Pressure [Max] | 1250 psi |
| Flow [Max] | 15 gal/min |
| Mount Type | 2 Bolt |
| Seal Options | Standard |
| Front Seal Kit If Available | 60540-000 |
| Port Size | 7/8-14 |
| Recommended System Working Temperature [Min] | -30 °F |
| Mounting Hole Size | 0.54 in |
| Special Features Hardware Code | 00 |
| Mounting Holes | 0.535 in |
| Weight | 15.15 LB |
